Water leaks can do a lot of damage, especially if they aren’t found and repaired quickly. In a home, they’re usually pretty obvious, but with a commercial property, that might not be the case. There are more spaces where a pipe could start leaking and go unnoticed, which could lead to significant harm to drywall, flooring, and even mechanical systems. Finding the source of a water leak at your commercial property is easier when you know what to look for.
Take Note of Any Dampness or Puddles
Puddles on the floor and dampness in the carpet or walls are big indications that something is wrong. You might also see buckling flooring or just notice that a specific room is particularly damp. The inside of your building should feel dry and secure. If the humidity is a problem, there’s mold or mildew, or you’re hearing running or dripping water, it’s time to figure out what’s going on. That could mean calling in the professionals if you can’t discover the source.
Before you reach out to a plumber for any needed repairs, though, you may want to try to narrow down the source of the leak. Just don’t wait too long if you can’t find the problem since that could mean more damage to your building. By taking a few minutes and looking for the source, listening for problems, and investigating the area, though, you might be able to see the issue more clearly. Then, you can potentially turn off the water to a particular area while you wait for the pros to make a repair.
Look for Problems With Water Pressure
One of the ways to test for the source of the leak is to check for water pressure. If you have good pressure at the first fixture in the building but not at the next one, the problem is most likely between those two areas. Of course, that could be a lot of area to cover, depending on how close the fixtures are to one another. You also need to know where the pipes come into your building and the basic layout of the plumbing itself. If you’re unfamiliar with that, tracing the problem through the pipes by testing water pressure may not work for you.
Ask the Professionals for Help
For any large commercial building or a leak without an obvious source, commercial water leak repair services are your best bet. You can call in the professionals to find the problem quickly so it can be corrected as efficiently as possible. Not only is this easier on your building because it reduces damage, but it’s also often easier on your stress levels as well. There’s no reason to settle for less when you can work with the pros to get the problem corrected. Then, you can return to operating your business and put the plumbing worries behind you.
Have the Pipes Inspected Periodically
To reduce the chances of water leaks in your commercial building, it’s a good idea to have the pipes inspected periodically. This can give you important insight into whether there are upcoming problems. Sometimes, a pipe breaks, and there isn’t anything you can do to stop it, but if you have older pipes in your building, an inspection can help catch minor issues before they become much more significant. Replacing pipes can give you increased peace of mind for the future.
Keeping Plumbing Working Well is Important
Understandably, you may be on edge after a water leak gets repaired because you’re worried about another one cropping up. That’s normal and will take a little time to fade away. But you can help feel more confident in your building’s plumbing by working with a plumber on any needed changes or updates. Also, consider regular maintenance to help keep drains flowing and fixtures in good working order. That can lower the chance of problems, so you have less to worry about over the long term.
